| :: Vinyl Application |
Before making any application please ensure that the surface is clean and not greasy.
We stock application squeeges in our misc section. You will need one of these to apply the decal correctly. |
|
1) Heres your decal, it consists of three layers, application tape, vinyl, backing paper. |
| 2) Mark out where you want your decal to go and stick it into place with some tape in the corners. |
| 3) Once in place, start to peel the backing paper off. The decal should be stuck to the application tape so be careful when peeling off. |
| 4) Use a squeegee to stick the decal down. Move it in an up and down motion to squeeze out the air between the sticker and the surface. |
| 5) After peeling off the backing paper and using the squeege to stick the decal down, you are ready to peel of the application tape. Wait at least 5 minutes for your decal to stick before taking off the tape. Then slowly peel off the application tape making sure that the decal has stuck. |
| 6) The finished product! Apply pressure to the decal to make sure it has stuck properly. |
| |
|
|
